Advantech ACP-2020


2U Rackmount Short Depth Chassis for ATX and mATX Motherboard

  • ƒ398 mm short depth 2U rackmount chassis ƒ
  • Supports ATX and mATX form factor motherboard ƒ
  • Dual front USB 3.0 ƒ
  • Support 350W 80 plus single flex ATX power supply or 500W 2U redundant power supply ƒ
  • Front-accessible system fan without opening top cover for easy maintenance ƒ
  • Built-in Intelligent System Module enabling whole system fan control and remote manageability
Part Number Power Supply  80 Plus Grade Power Supply Type Wattage Switch
ACP-2020MB-35ZE PS8-350FATX-XE Bronze Single 350W ATX
ACP-2020MB-50RE RPS8-500U2-XE Bronze 1+1 redundant 500W ATX
Drive Bay External Internal
Slim Optical Drive 1 -
2.5'' 2 (hot-swap tray module as optional)* 2
Cooling Fan 1 (8 cm / 41CFM)
Air Filter Yes
Front I/O Interface USB 3.0* 2
Miscellaneous LED Indicators Power, HDD, temperature, fan, LAN1 and LAN2
Rear Panel Two 9-pin D-Sub
Intelligent System Module Remote Monitoring CPU/System fan speed, CPU/System temperature, motherboard voltage. (Only selected Advantech MBs/CPU cards with SUSIAccess installed can fully enabled these functions, check with Advantech local rep. for detailed information.)
Environment Operating Non-Operating
Temperature 0 ~ 40° C (32 ~ 104° F) -20 ~ 60° C (-4 ~ 140° F)
Humidity 10 ~ 55% @ 40° C, non-condensing 10 ~ 95% @ 60° C, non-condensing
Vibration (5 ~ 500 Hz) 1 Grms 2 G
Shock 10 G (with 11 ms duration, half sine wave) 30 G
Physical Characterists Dimensions (W x H x D) 482 x 88 x 398 mm (18.96'' x 3.46'' x 15.67'')
Weight 8.6 kg
* The USB 3.0 port do not operate if motherboard with no on-board USB 3.0 box header.
* ACP-2020 2.5" drive bay, both default internal and hot-swap tray module, support 2.5" HDD with thickness less than 14.7mm.
Part Number Description
96CB-SATAPOWER-6P1 SATA power wire 6-pin to big 4-pin (for slim ODD)
1950014302N001 Special bracket for riser card AIMB-RP3P8-12A1E
1990021407T000 Door filter
98R1202000E 2.5" SAS/SATA Hot-swap module

If you have any questions or would like any further information, please send us a message.

Your Name (required)

Your Company (required)

Your Email (required)

Phone (required)

Your Message