Interface-Concept-ComEth4050A-Ethernet-Switch

ComEth4050a

Description

6U CompactPCI® 24 10/100/1000 Ethernet ports with a full-wire speed switching capacity of up to 37Mpps.

Main Features

24 10/100/1000 Ethernet ports with a full-wire speed switching capacity of up to 37Mpps.

Layer2 Switching capabilities :

  • 16K entrie forwarding database
  • Automatic or controlled lear-ning and aging routing table
  • Full-line rate switching engine
  • Port and MAC access control
  • Flow control and backpressure
  • 9 KB Jumbo Frame
  • IPV4 IGMP IPV6 MLD snooping
  • MAC address transplanting for Rapid Reconfiguration 802.1w

Link aggregation static or LACP

Bandwidth management :

  • Multicast rate limiting
  • Egress rate shaping with rate ranging port from 64K to 1Gbs
  • Minimal bandwidth guarantee per traffic Class

VLANs services :

  • 4K actives VLANs
  • 4K Bridge mulcticast groups
  • Flexible VLAN assignment 802.1Q port -based, protocol based 802.1v, service Vlans 802.1ad, Policy-based Vlans

Quality of Service engine :

  • 8 priority queues per port
  • Traffic Class assignment according to 802-1p tag, MAC address, Port, DiffServ CP or Policy engine

L3 IP V4 & V6 routing : :

  • 1K UC ARP entries
  • RIPV2, OSPF V2 Routing
  • proxy-ARP
  • DHCP relay

Security features :

  • 802.1X Port authentication
  • Multicast/Broadcast limiting
  • STP/RSTP protocol
  • Virtual cable tester On-Line

Security features :

  • Web or CLI management
  • Standard & private MIBs
  • Enhanced Port mirroring
  • Easy software updating /li>

Great For

ComEth4050a is built on the latest generation of Gigabit switch engine and PHY transceiver. It combines in a single equipment a layer 2+ switch and a full layer 3 router with an optimized power consumption.

ComEth4050a supports full-wire speed L2 bridging and L3 routing with L2-L4 advanced traffic classification, filtering and prioritization. For instance, it can provide strict priority traffic needed for delay-sensitive or critical applications.

ComEth4050a ports are compatible both with PICMG 2.16 or VITA 31.1 system. Twenty

GigaEthernet are routed on rear I/O in compliance with PICMG 2.16. The remaining Giga Ethernet channels are available on the front or on the rear panel through a RTM. The front copper ports use RJ45. The four optional fiber ports use LC connectors. The Gigabit transceivers select automatically the media with activity.

Auto-crossover, auto-polarity, auto-negotiation and automatic MAC address management make ComEth4050a a true Plug&Play switch.

The Marvell Virtual Cable tester allows a remote identification of potential cable malfunctions as excessive pair skew, cable opens, impedance mismatch…

This switch is fully upward compatible with ComEth4000, 4020, 4030 and 4050 range.

SKU: ce78d1da254c Categories: , Tags: , ,

Description

6U CompactPCI® 24 10/100/1000 Ethernet ports with a full-wire speed switching capacity of up to 37Mpps.

Description

6U CompactPCI® 24 10/100/1000 Ethernet ports with a full-wire speed switching capacity of up to 37Mpps.

Main Features

24 10/100/1000 Ethernet ports with a full-wire speed switching capacity of up to 37Mpps.

Layer2 Switching capabilities :

  • 16K entrie forwarding database
  • Automatic or controlled lear-ning and aging routing table
  • Full-line rate switching engine
  • Port and MAC access control
  • Flow control and backpressure
  • 9 KB Jumbo Frame
  • IPV4 IGMP IPV6 MLD snooping
  • MAC address transplanting for Rapid Reconfiguration 802.1w

Link aggregation static or LACP
Bandwidth management :

  • Multicast rate limiting
  • Egress rate shaping with rate ranging port from 64K to 1Gbs
  • Minimal bandwidth guarantee per traffic Class

VLANs services :

  • 4K actives VLANs
  • 4K Bridge mulcticast groups
  • Flexible VLAN assignment 802.1Q port -based, protocol based 802.1v, service Vlans 802.1ad, Policy-based Vlans

Quality of Service engine :

  • 8 priority queues per port
  • Traffic Class assignment according to 802-1p tag, MAC address, Port, DiffServ CP or Policy engine

L3 IP V4 & V6 routing : :

  • 1K UC ARP entries
  • RIPV2, OSPF V2 Routing
  • proxy-ARP
  • DHCP relay

Security features :

  • 802.1X Port authentication
  • Multicast/Broadcast limiting
  • STP/RSTP protocol
  • Virtual cable tester On-Line

Security features :

  • Web or CLI management
  • Standard & private MIBs
  • Enhanced Port mirroring
  • Easy software updating /li>

Great For

ComEth4050a is built on the latest generation of Gigabit switch engine and PHY transceiver. It combines in a single equipment a layer 2+ switch and a full layer 3 router with an optimized power consumption. ComEth4050a supports full-wire speed L2 bridging and L3 routing with L2-L4 advanced traffic classification, filtering and prioritization. For instance, it can provide strict priority traffic needed for delay-sensitive or critical applications. ComEth4050a ports are compatible both with PICMG 2.16 or VITA 31.1 system. Twenty GigaEthernet are routed on rear I/O in compliance with PICMG 2.16. The remaining Giga Ethernet channels are available on the front or on the rear panel through a RTM. The front copper ports use RJ45. The four optional fiber ports use LC connectors. The Gigabit transceivers select automatically the media with activity. Auto-crossover, auto-polarity, auto-negotiation and automatic MAC address management make ComEth4050a a true Plug&Play switch. The Marvell Virtual Cable tester allows a remote identification of potential cable malfunctions as excessive pair skew, cable opens, impedance mismatch… This switch is fully upward compatible with ComEth4000, 4020, 4030 and 4050 range.

Supplier: Interface Concept

Part Numbers: 

Category: Ethernet Switch

If you have any questions or would like any further information, please send us a message.

Your Name (required)

Your Company (required)

Your Email (required)

Phone (required)

Your Message