Heavy Industrial RS-422/485 Isolated Repeater

  • IEEE-61850-3, IEEE-1613
  • NEMA TS2
  • -40 to 85°C Operating Temperature
  • Rugged IP30 Metal Panel Mount Case
  • 50G Shock, 4G Vibration
  • 2kV Triple Isolation
  • 10 to 48 VDC Input Power

Description

Model BB-485OPDRI-PH is our premium heavy industrial RS-422/485 isolated repeater. Designed for rugged industrial environments, it has been put through some of the most exacting compliance tests in the industry. Meeting the requirements of IEC 61850-3 and IEEE 1613, it is suitable for installation in electrical substations. These specifications are more stringent than the NEMA TS1/TS2 requirements for transportation applications. Powerful isolation on both data ports protects your equipment and data from damaging ground loops and surges. Additional isolation on the power supply circuits adds a third degree of protection.

Packaged in a rugged IP30 metal case, it extends full or half-duplex RS- 422/485 signals an additional 4000 feet and allows you to add another 32 nodes to your network. Our bit-wise enabled circuitry automatically detects the data rate without setting a DIP switch.

Part Number Description
BB-4850PDRI-PH Heavy Industrial RS-232 to RS-422/485 Isolated Repeater
Serial Technology
RS-422 TDA(-), TDB(+), RDA(-), RDB(+)
RS-485 4-Wire TDA(-), TDB(+), RDA(-), RDB(+)
RS-485 2-Wire Data A(-), Data B(+)
RS-422/485 CON. 5 Position, Removable Terminal Block
Data Rate 1.2 to 115.2 Kbps
Isolation 2 KV RMS, 1 minute
Surge Protection 600 W Peak Power Dissipation
Clamping time < 1 pico-second
Industrial Bus MODBUS ASCII / RTU
Bias Built-in, switchable 1.2KΩ XMT/RCV
Termination Built-in, switchable 120Ω
Power
Source External
Power Connector 2 Position Removable Terminal Block
Input Voltage 10 to 48 VDC (56 VDC Maximum)
Power Consumption 0.5 W typical (2.3 W with termination)
Terminal Blocks
Wire Size Accepted 28 to 12 AWG, Copper wire only
Pitch 5.08 mm
Insulation Resistance ≥500 MΩ @ 500 VDC
Maximum Torque 5 Kg / cm
Temperature rating of field installed conductors 105°C minimum.
Indicators
Power Red LED
TD / RD (Each Port) Green LED
Mechanical
Dimensions 13.24 x 9.29 x 3.30 cm
5.2 x 3.7 x 1.3 in
Enclosure IP30 Metal, Panel Mount
Weight 0.46 lbs (208.65 grams)
MTBF 122832 Hours
MTBF Calc. Method Parts Count Reliability Prediction
Environmental
Operating Temperature -40 to 85°C (-40 to 176°F)
Storage Temperature -40 to 85°C (-40 to 176°F)
Operating Humidity 0 to 95% Non-condensing
Regulatory FCC, CE, IEC 61850-3, IEEE 1613, UL C1 D2, File: E245458, NEMA TS2

If you have any questions or would like any further information, please send us a message.

Your Name (required)

Your Company (required)

Your Email (required)

Phone (required)

Your Message